2008-2009 Suzuki 750 King Quad Service Manual, Page 334Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 334

2C-9 Rear Suspension: Tighten the shock absorber mounting lower bolt and nut to the specified torqueTightening torque Rear
(1) Dust seal (2) Washer (3) Spacer (4) Connect the stabilizer joint by tightening the joint nut to the specified torqueTightening
torque Rear stabilizer joint nut [Up to 5SAAR41A497105526] (c): 34 Nm (3.4 kgf-m, 24.5 lbf-ft) Rear stabilizer joint nut
[From 5SAAR41A497105527] (c): 60 Nm (6.0 kgf-m, 43.5 lbf-ft)I831G1230032-01 2) Insert the spacer into bushings3) Check the
play by moving the spacer up and downIf excessive play is noted, replace the bushings with new oneRefer to "Rear Suspension
Upper Arm Bushing Removal and Installation (Page 2C-11)" I831G1230030-01 Tighten the suspension arm upper bolt and pivot