2008-2009 Suzuki 750 King Quad Service Manual, Page 371Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 371

Differential: Remove the oil filler cap and measure the backlash of the differential ring gear using the horizontal type
with thinner oneIf the right side shim was changed with 0.10 mm thicker shim, replace the left side shim with one that is
0.10 mm thinnerLeft Side Shim Selection Install the right side shim(s) (1) and front drive (differential) gear assemblyNOTE
Do not install the left side shim(s) at this time I831G1320062-01 Front drive (differential) gear backlash Standard: 0.05
0.10 mm (0.0020 0.0040 in) Remove the dial gauge and turn the front drive (differential) gear 120then measure the backlashRepeat
this procedure once more and compare the difference of the three measurementsIf the backlash should be re-checked until the
backlash is within specificationCheck the table at the appropriate shim thicknessNOTE Adjust the backlash by referring to
the table at using the thickness of the removed shims guideBacklash Under 0.05 mm (0.0020 in) 0.05 0.10 mm (0.0020 0.0040
in) Over 0.10 mm (0.0040 in) Shim adjustment Increase shim thickness Correct Decrease shim thickness I831G1320064-01 Put