2008-2009 Suzuki 750 King Quad Service Manual, Page 388Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 388

3B-32 Differential: Left Side Shim Selection Put few pieces of solder (O.D 1.2 1.5 mm L: mm) on the back side of final driven
thickness 27326-31G00-030 0.30 mm (0.0118 in) 27326-31G00-035 0.35 mm (0.0138 in) 27326-31G00-040 0.40 mm (0.0157 in) 27326-31G00-050
0.50 mm (0.0197 in) 27326-31G00-060 0.60 mm (0.0236 in) After selecting the proper size of shim(s), check or adjust the backlash
and tooth contactTooth Connect Remove the final driven gear assembly (1) I831G1320137-01 I831G1320135-01 Remove the final
gear cover Measure the thickness of compressed solder with the micrometerSpecial tool0990020205 (Micrometer (0 25 mm)) Shim