2008-2009 Suzuki 750 King Quad Service Manual, Page 389Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 389

Differential: Install the left and right side shim(s) (2) and final driven gear assembly (1) Tooth contact Contact at tooth
At this time, it is not necessary to install the gear case cover's O-ring Incorrect (Contact at tooth top) [B] I831G1320140-01
Correct [C] Incorrect (Contact at tooth root) I831G1320141-01 I831G1320142-02 Rotate the final driven gear several turns
in each directionThis will provide connect pattern on the coated teeth of the gear Remove the final drive gear and compare
the coated teeth to the examples shown in [A], [B] and [C]If tooth contact is found to be incorrect (examples [A] and [C]),
the shim between the final drive gear bearing and gear case must be changed and the tooth contact should be re-checked until
the tooth contact is found to be correct (example [B]) List of shims (for final drive gear) Part NoShim thickness 27445-24A01-030