2008-2009 Suzuki 750 King Quad Service Manual, Page 403Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 403

Transfer: Gearshift Cam Disassembly and Assembly Disassembly! B831G23306007 Remove the reverse gearshift cam (6) and snap
of the cams, washer and snap ringsRefer to "Gearshift System Construction (Page 3C-10)"I831G1330035-01 Remove the gearshift
cam (2), spring (3) and washer (4) CAUTION Never reuse snap ringsAfter snap rings has been removed from shaft, it should
be discarded and new snap rings must be installed When installing new snap rings, do not expand the end gap larger than required
to slip the snap rings over the shaft After installing snap rings, make sure that they are completely seated in their groove
and securely fitted When installing new snap ring (1), pay attention to its directionFit it to the side where the thrust