2008-2009 Suzuki 750 King Quad Service Manual, Page 404Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 404

3C-12 Transfer: Install the snap ring (1) and gearshift cam (2) Transfer Gear Bearing Inspection B831G23306009 CAUTION Align
ShaftReverse Idle Gear Disassembly and Assembly (Page 3C-6)"Gearshift Fork to Groove Clearance B831G23306010 NOTE The clearance
for each gearshift fork plays an important role in the smoothness and positiveness of the shifting actionUsing thickness
gauge, check the gearshift fork clearance in the groove of its gearIf the clearance checked is noted to exceed the limit,
replace the fork or its dog, or bothI831G1330040-01 Install the snap ring Special tool (A): 0990020803 (Thickness gauge)
Gearshift fork to gearshift fork groove clearance Standard: 0.10 0.30 mm (0.0040 0.0120 in) Service limit: 0.50 mm (0.020
in) Transfer Gear Bearing Removal and Installation Refer to "Bearing Removal and Installation in Section 1D (Page 1D-61)"