2008-2009 Suzuki 750 King Quad Service Manual, Page 443Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 443

Brake Control System and Diagnosis: 4) Loosen the air bleeder valve by turning it quarter of turn so that the brake fluid
the air bleeder valve, pump and squeeze the lever, and open the valve6) Repeat this process until the fluid flowing into
the receptacle no longer contains air bubblesNOTE While bleeding the brake system, replenish the brake fluid in the reservoir
as necessaryMake sure that there is always some fluid visible in the reservoir7) Close the air bleeder valve and disconnect
the hoseTightening torque Front brake air bleeder valve: Nm (0.6 kgf-m, 4.5 lb-ft) 8) Fill the reservoir with brake fluid
to the upper mark of the reservoir I831G1410008-01 5) Fill the reservoir with new brake fluidBF: Brake fluid (DOT 4) 6) Connect
clear hose to the air bleeder valve and insert the other end of the hose into receptacle I831G1410008-01 9) Install the reservoir