2008-2009 Suzuki 750 King Quad Service Manual, Page 447Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 447

Brake Control System and Diagnosis: 4) Place rag underneath the brake hose union bolt (2) on the master cylinder to catch
to prevent fluid leakageTightening torque Brake hose union bolt (b): 23 Nm (2.3 kgf-m, 16.5 lb-ft) I831G1410022-01 Installation
Install the front brake master cylinder in the reverse order of removalPay attention to the following points: When installing
the master cylinder (1) onto the handlebars (2), align the master cylinder holder's mating surface "A" with the punch mark
"B" on the handlebars (2) and tighten the upper holder bolt firstRefer to "SteeringHandlebars Assembly Construction in Section
6B (Page 6B-2)"Tightening torque Master cylinder holder bolt (Upper and Lower) (a): 10 Nm (1.0 kgf-m, 7.0 lb-ft) I831G1410025-02