2008-2009 Suzuki 750 King Quad Service Manual, Page 456Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 456

4B-3 Front Brakes: 7) Apply small quantity of thread lock to the brake pad mounting pins (2): Thread lock cement 9900032050
9900032030 (THREAD LOCK CEMENT SUPER 1303 or equivalent) Tighten the brake caliper mounting bolts (1) to the specified torqueTightening
torque Brake caliper mounting bolt (a): 26 Nm (2.6 kgfm, 19.0 lb-ft)(a) I831G1420006-08 NOTE After replacing the brake pads,
pump the brake lever several times to check for proper brake operation and then check the brake fluid level9) Install the
front wheel assembly Front Brake Caliper Removal and Installation B831G24206004 Removal 1) Remove the front wheel assembly2)
Drain brake fluidRefer to "Brake Fluid Replacement in Section 4A (Page 4A-6)"3) Remove the brake hose from the caliper by