2008-2009 Suzuki 750 King Quad Service Manual, Page 504Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 504

Automatic Transmission: Installation Install the gear shift lever in the reverse order of removalPay attention to the following
Install the shift lever assemblyRefer to "Shift Lever Assembly Components (Page 5A-23)"3) After Installing the gear shift
lever assembly, adjust the shift rodRefer to "Shift Rod Adjustment (Page 5A-25)" I831G1510107-03 Apply thread lock to the
shift lever assembly mounting bolts: Thread lock cement 9900032050 (THREAD LOCK CEMENT 1342 or equivalent) I831G1510110-03
I831G1510108-02 Install the gear shift arm (1) to the gear shift shaft in the correct position Tighten the bolt (2) securely
Shift Rod Adjustment B831G25106020 CAUTION Make sure the operating angle of the gear shift arm is accurate 1) Holding the
rod (2), loosen the lock-nuts (1)2) Turning the rod (2), adjust the length of the rod3) Tighten the lock-nuts (1)I831G1510109-01