2008-2009 Suzuki 750 King Quad Service Manual, Page 514Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 514

SteeringHandlebar: 8) Remove the following parts from the right handlebara) Right grip (4) b) Front brake master cylinderFront
upper clamps (7) and handlebars (8) I831G1620010-01 I831G1620013-01 "a": Clearance Installation Install the handlebars in
the reverse order of removalPay attention to the following points: Install the washers (1) and bolts (2) as shown in the
steeringhandlebars constructionRefer to "SteeringHandlebars Assembly Construction (Page 6B-2)" Align the punch mark "A" on
the handlebars with the mating surface "B" of rear brake lever assembly Tighten the rear brake lever holder clamp bolt (4)
to the specified torqueTightening torque Rear brake lever holder clamp bolt (b): 11 Nm1.1 kgf-m, 8.0 lb-ft) I831G1620011-01