2008-2009 Suzuki 750 King Quad Service Manual, Page 518Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 518

SteeringHandlebar: Apply grease to the steering shaft holders before installing the shaft holders: Grease 9900025160 (Water
lock cement 9900032030 (THREAD LOCK CEMENT SUPER 1303 or equivalent) I831G1620030-02 Install the steering shaft holder (5)
and tighten the mounting bolts (6) to the specified torqueTightening torque Steering shaft holder bolt (a): 23 Nm (2.3 kgf-m,
16.5 lb-ft) Tighten the steering shaft lower nut (9) to the specified torqueTightening torque Steering shaft lower nut (b):
162 Nm (16.2 kgf-m, 117.0 lb-ft) Install the cotter pin! CAUTION The removed cotter pin must be replaced with new one5 I831G1620031-02