2008-2009 Suzuki 750 King Quad Service Manual, Page 546Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 546

9C-7 Combination MeterFuel MeterHorn: Speed Sensor Inspection Inspect the speed sensor in the following procedures: 1) Remove
3) Inspect the ignition switch for continuity with testerIf any abnormality is found, replace the ignition switch with new
oneI831G1930018-05 Special tool0990025008 (Multi-circuit tester set) Tester knob indication Continuity) Color Position 1Speed
sensor 3) Move screwdriver back and forth across the pickup surface of the speed sensorThe voltage readings should cycle
as follows (0 12 or 12 V)If the voltage reading does not change, replace the speed sensor with new oneNOTE While testing,
the highest voltage reading should be the same as the battery voltage (12 V) I831G1930023-05 4) After finishing the ignition