2008-2009 Suzuki 750 King Quad Service Manual, Page 585Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 585

0B-2 Maintenance and Lubrication: 5) Measure the distances ("A" and "B") between the front wheelsSubtract the measurement
distances "A" and "B"4) If the toe-out is not within specification, repeat the adjustment as above until the proper toe-out
is obtained and distances "C" and "D" become equal"A" I831G1020059-04 Right angle (90) If the toe-out is out of specification,
bring it into the specified rangeRefer to "Toe Adjustment (LT-A750XP ZK9) (Page 0B-2)" I831G1020088-04 Toe Adjustment (LT-A750XPZK9)
5) After adjustment has been made, tighten the four lock-nuts to the specified torqueTightening torque Tie-rod lock-nut (a):
29 Nm (2.9 kgf-m, 21.0 lbfft) Adjust the toe-out as follows: 1) Loosen the lock-nuts (1), (2) on each tie-rod B931G40206032