2008-2009 Suzuki 750 King Quad Service Manual, Page 615Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 615

3A-4 Drive ChainDrive TrainDrive Shaft: 5) Insert the cage into the outer race and install the new stopper ring to the groove
distort the boot"a" I931H1310008-01 Front Drive Shaft Inspection (LT-A750XPZK9) Inspect the front drive shaft in the following
procedures: 1) Remove the front drive shaft assemblyRefer to "Front Drive Shaft Assembly Removal and Installation in related
manual"2) Check the drive shaft boots for twist and grease leakIf any defects are found, replace the defective parts with
new ones3) Inspect the boots, circlip and boot bands for wear or damageIf any damages are found, replace them with new ones
B931G43106011 I931H1310006-03 "D": Right side "E": Left side "F": Rotation direction "a": 182.1 mm (7.2 in) 8) Install the
circlip (2) into the groove of front drive shaft spline! CAUTION I931H1310009-01 The removed circlip must be replaced with