2008-2009 Suzuki 750 King Quad Service Manual, Page 632Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 632

6B-4 SteeringHandlebar: 9) Remove the handlebar upper clamps (7) and handlebars (8) Install the washers (3) and bolts (4)
the specified torqueNOTE First tighten the handlebar clamp bolts (4) (front ones) to the specified torqueTightening torque
Handlebar clamp bolt (b): 26 Nm (2.6 kgf-m, 19.0 lbf-ft) I831G1620006-05 Installation Install the handlebars in the reverse
order of removalPay attention to the following points: Install the left brake lever (1) to the handlebars Align the punch
mark "A" on the handlebars with the mating surface "B" of rear brake lever (1) Tighten the rear brake lever holder clamp