2008-2009 Suzuki 750 King Quad Service Manual, Page 634Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 634

6B-6 SteeringHandlebar: Steering Shaft Removal and Installation (LTA750XPZK9) Removal 1) Remove the EPS control unitRefer
5) Remove the steering arm plate (4) and steering shaft (5) I931G3620011-01 WARNING 6) Remove the lower dust seal (6) and
O-ring (7) When using the tie-rod end remover, keep clear of the tie-rod end because it may come loose with some force and
could strike you! CAUTION Make sure that the vehicle is supported securelySpecial tool (A): 0994272410 (Tie-rod end remover)
I931G3620012-01 7) Remove the steering shaft bushing (8) and dust seal (9) with the special tools and suitable socket wrenchSpecial