2008-2009 Suzuki 750 King Quad Service Manual, Page 635Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 635

SteeringHandlebar: Installation Install the steering shaft in the reverse order of removalPay attention to the following
resistance grease or equivalent) Install the steering shaft When installing the steering arm plate (5), align the wide spline
"A" of steering shaft (6) with the wide spline "B" of steering arm plate (5) I931G3620018-01 Apply small quality thread lock
to the thread part of steering shaftI931G3620015-01 Apply grease to the lower dust seal (3) and O-ring (4) : Thread lock
cement 9900032030 (THREAD LOCK CEMENT SUPER "1303" or equivalent) Tighten the steering shaft lower nut (7) to the specified