2008-2009 Suzuki 750 King Quad Service Manual, Page 637Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 637

SteeringHandlebar: 4) Remove the other tie-rod end in the same manner as described previously5) Separate the tie-rod ends
open end wrenchNOTE The lock-nuts (1) have left-hand threadsTightening torque Tie-rod lock-nut (a): 29 Nm (2.9 kgf-m, 21.0
lbf-ft) Install the tie-rod ends (steering knuckle side)Refer to "Front Wheel HubSteering Knuckle Removal and Installation
in Section 2B in related manual" After installed wheels, inspect the toe-outIf the toeout is out of specification, bring
it into the specified rangeRefer to "Steering System Inspection in Section 0B in related manual" and "Toe Adjustment (LT-A750XPZK9)
in Section 0B (Page 0B-2)" Steering Related Parts Inspection (LT-A750XP ZK9) Refer to "Steering Shaft Removal and Installation
(LTA750XPZK9) (Page 6B-6)" and "Tie-rodTie-rod End Removal and Installation (LT-A750XPZK9) (Page 6B8)"Tie-rod Inspect the