2008-2009 Suzuki 750 King Quad Service Manual, Page 642Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 642

6C-3 Power Assisted Steering System: Detecting Principle The column shaft is connected to the input shaft by means of serrationThe
the steering torque as 0During operating the handlebars, the EPS control unit processes the main torque sensor input signal
to determine the steering torque required for the current conditionThe relation between the steering direction of the EPS
control unit and the output voltage is as follows: The direction is determined to be right turn steering "a" if the main
torque sensor output voltage is lower than 2.5 and to be left turn steering if the voltage is higher than 2.5 for controlling
the steering direction in the case of normal steering operationConversely, the direction is determined to be left turn steering
"b" if the sub torque sensor output voltage is lower than 2.5 and to be right turn steering if the voltage is higher than
2.5 for controlling the steering direction Column shaft Torsion bar Input shaft Sleeve Helical spline "a" Sleeve Pin Output