2008-2009 Suzuki 750 King Quad Service Manual, Page 669Get this manual

2008-2009 Suzuki 750 King Quad Service Manual, Page 669

Power Assisted Steering System: Step Action 1) Turn the ignition switch OFF2) Check the torque sensor coupler for loose or
Torque sensor (main or sub) circuit open I931G3630026-01 3) Disconnect the torque sensor coupler4) Turn the ignition switch
ON5) Measure the input voltage between wire "A" and groundIf OK, then measure the voltage at the wire "A" and wire "B"Special
tool (A): 0990025008 (Multi circuit tester set) Tester knob indication Voltage) Torque sensor input voltage 5.0 V If check