2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 41Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 41

Maintenance and Lubrication: Front Differential Gear Oil Replacement (LTA400F, LT-F400F) Replace front differential gear
oil level holeWhen performing an oil change, the front differential will hold about 300 ml (10.110.6 USImp oz) of oilUse
hypoid gear oil SAE #90, API grade GL-5NOTE Use hypoid gear oil SAE #80, API grade GL-5, if the vehicle is ridden where the
ambient temperature is below (32 F)Front differential gear oil capacity 300 ml (10.110.6 USImp oz) 4) Drain front differential
gear oil by removing the oil drain plug (3) 7) Tighten the oil level plug (2) and oil filler plug (1) to the specified torque!
CAUTION Replace the gasket washers with new onesI827H1020015-01 Tightening torque Front drive (differential) gear oil level
plug (b): Nm (0.8 kgf-m, 6.0 lb-ft) Front drive (differential) gear oil filler plug (c): 35 Nm (3.5 kgf-m, 25.5 lb-ft) I827H1020017-01