2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 49Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 49

Maintenance and Lubrication: Steering System Inspection B827H20206021 Toe-In Adjustment Inspect steering system Initially
toe-in is within the specified rangeToe-in ("A" "B") Standard: 10 mm (0.4 in) Adjust the toe-out as follows: 1) Loosen the
lock-nuts (1), (2) on each tie-rod B827H20206022 CAUTION The lock-nuts (2) have left-hand threadsNOTE Hold the concave part
"a" of tie-rod with wrench I831G1020087-03 I831G1020058-01 2) Temporarily tighten the four lock-nuts3) Check that the distances
"C" and "D" are equal, as shownIf the distances are not equal, adjust the tierod to the right or left until the toe-in is
within specificationCheck the toe-in again by measuring distances "A" and "B"4) If the toe-in is not within specification,
repeat the adjustment as above until the proper toe-in is obtained and distances "C" and "D" become equal"A" I827H1020042-01