2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 52Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 52

0B-21 Maintenance and Lubrication: 3) Start the engine4) Shift the transfer range lever to the "High" position5) Slowly open
absorber mounting nut (Upper) 35 (3.5 kgf-m, 25.5 lb-ft) Rear shock absorber mounting nut (Lower) 60 (6.0 kgf-m, 43.5 lb-ft)
rear swingarm pivot nut 102 (10.2 kgf-m, 73.5 lb-ft) CAUTION Rear axle hosing mounting bolt (Final gear case) 55 (5.5 kgfm,
40.0 lb-ft) Rear axle hosing mounting bolt (Swingarm) 60 (6.0 kgf-m, 43.5 lb-ft) Do not apply full power for more than seconds
or damage to the clutch or engine may occurLock-up rmin 300 900 rmin Compression Pressure Check Refer to "Compression Pressure
Check in Section 1D (Page 1D-2)" B827H20206025 Oil Pressure Check Refer to "Oil Pressure Check in Section 1E (Page 1E4)"
B827H20206026 Automatic Clutch Inspection (LT-A400F) This vehicle is equipped with centrifugal type automatic clutchTo insure
proper performance and longevity of the clutch assemblies it is essential that the clutches engage smoothly and graduallyBefore