2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 91Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 91

Engine Mechanical: Tighten the cylinder head nuts to the specified torqueTightening torque Cylinder head nut (8 mm) (Initial):
base nut: 10 Nm (1.0 kgf-m, 7.0 lb-ft) I827H1140027-01 Align the marks "C" on the camshaft so that they are parallel with
the surface of the cylinder head Engage the hole of the camshaft sprocket with the locating pin "D" on the camshaftNOTE Do
not rotate the generator rotor while doing thisWhen the sprocket is not positioned correctly, turn the sprocket Tighten the
cam chain tensioner bolt (3)Tightening torque Cam chain tensioner bolt (a): 13 Nm (1.3 kgf-m, 9.5 lb-ft) I827H1140025-01