2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 105Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 105

Engine Mechanical: NOTE To properly measure the oil clearance with plastigauge, all gasket material must be removed from
I827H1140077-01 Tighten the camshaft journal holder bolts evenly and diagonally to the specified torqueTightening torque
Cylinder head cover bolt10 Nm (1.0 kgf-m, 7.3 lb-ft) NOTE Do not rotate the camshafts with the plastigauge in placeRemove
the cylinder head cover, and read the width of the compressed plastigauge with envelope scaleThis measurement should be taken
at the widest partI827H1140079-01 Camshaft Runout Measure the runout with dial gaugeReplace the camshaft if the runout exceeds
the limitSpecial tool0990020607 (Dial gauge (1100 mm, 10 mm))0990020701 (Magnetic stand)0990021304 (V-block (100 mm)) Camshaft