2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 108Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 108

1D-32 Engine Mechanical: b) Install the 2nd ring (3) and 1st ring (4) to pistonNOTE 1st ring (4) and 2nd ring (3) differ
piston diameter from the cylinder bore diameterIf the piston-to-cylinder clearance exceeds the following limit, overhaul
the cylinder and use an oversize piston, or replace both cylinder and the pistonPiston-to-cylinder clearance Service limit:
0.120 mm (0.0047 in) Piston oversize: 0.5 2) Position the gaps of the three rings and side rails as shownBefore inserting
piston into the cylinder, check that the gaps are so locatedEX "D" "E" I827H1140089-01 I831G1140181-03 "D": 2nd ring and
lower side rail "E": Upper side rail "F": 1st ring and spacer 3) Install the piston and piston pinRefer to "Engine Top Side