2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 134Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 134

1D-58 Engine Mechanical: Conrod and Crankshaft Inspection Refer to "Engine Bottom Side Disassembly (Page 1D34)" B827H21406024
Crankshaft Runout Measure the crankshaft runout with V-blocks and dial gaugeNOTE Place the crankshaft onto the V-blocks so
that it becomes horizontally Measure the runout from the tips of the crankshaftCrankshaft runout Service limit: 0.08 mm (0.003
in) Special tool (A): 0990020607 (Dial gauge (1100 mm, 10 mm))0990020701 (Magnetic stand)0990021304 (V-block (100 mm)) Conrod
Deflection Wear On the big end of the conrod can be estimated by checking the movement of the small end of the rodThis method
can also check the extent of ware on the parts of the conrod's big endSpecial tool (A): 0990020701 (Magnetic stand) (B):