2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 160Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 160

1E-11 Engine Lubrication System: Install the oil cooler Tighten the oil cooler hose bolts (oil cooler side) (2) to the specified
LOCK CEMENT SUPER 1360 or equivalent) Tightening torque Oil cooler hose bolt (engine side) (a): 10 Nm (1.0 kgf-m, 7.0 lb-ft)
I827H1150032-01 Pour engine oilRefer to "Engine Oil and Filter Replacement in Section 0B (Page 0B-7)" Oil Cooler Cleaning
Clean the oil cooler in the following procedures: 1) Remove the oil coolerRefer to "Oil CoolerOil Cooler Hose Removal and
Installation (Page 1E10)"2) Blow out any foreign matter that is stuck in the oil cooler fins using compressed air B827H21506012