2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 186Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 186

1G-19 Fuel System: 9) Remove the following parts Main jet (20) Needle jet holder (21) Needle jet (22) Slow jet (23) Starter
the end of the bit to prevent drilling into the pilot screw (3)3) Carefully drill through the plug (2) "A" 2 1Drill bit I649G1170046-02
4Carburetor body "A": Drill-stop 2Tampering plug 3Pilot screw I827H1170008-02 CAUTION Never remove the throttle valve (26)
Never remove the jets (27), (28) and (29)They are press fitted at the factory and attempting to remove them will cause damage
4) Thread self-tapping sheet metal screw into the plug (2)5) Pull on the screw head with pliers to remove the plug6) Carefully
clean any metal shavings from the area7) Slowly turn the pilot screw clockwise and count the number of turns until the screw