2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 201Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 201

Starting System: Tighten the starter motor mounting bolts (1) with the engine ground lead wire (2) and starter motor lead
motor housing bolts1 I827H1190005-01 Tightening torque Starter motor housing bolt (a): 3.5 Nm (0.35 kgfm, 2.5 lb-ft) Starter
Motor Disassembly and Assembly Refer to "Starter Motor Removal and Installation (Page 1I-3)" B827H21906003 Disassembly Disassemble
the starter motor as shown in the starter motor components diagramRefer to "Starter Motor Components (Page 1I-3)"Assembly
Reassemble the starter motor in the reverse order of removalPay attention to the following points:! I827H1190007-01 CAUTION
Starter Motor Inspection Replace the O-rings with new ones to prevent oil leakage and moisture Apply grease to the lip of