2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 221Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 221

Charging System: 18) Remove the generator stator (15) along with the CKP sensor (16)16 Degrease the tapered portion "A" of
points: Tighten the generator stator set bolts and CKP sensor mounting bolts to the specified torqueNOTE Be sure the grommet
(1) is set to the generator coverTightening torque Generator stator set bolt (a): 11 Nm (1.1 kgf-m, 8.0 lb-ft) CKP sensor
mounting bolt (b): Nm (0.6 kgf-m, 4.3 lb-ft) Generator lead wire clamp bolt (c): Nm (0.6 kgfm, 4.3 lb-ft) I827H11A0019-01
Hold the generator rotor with the special tool and tighten the generator rotor nut to the specified torqueSpecial tool (A):