2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 252Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 252

2C-2 Rear Suspension: Rear Shock Absorber Removal and Installation Removal 1) Place the vehicle on level ground and support
the rear shock absorber mounting bolts: Thread lock cement 9900032030 (THREAD LOCK CEMENT SUPER 1303 or equivalent) Tighten
the rear shock absorber upperlower mounting bolts and nutsTightening torque Rear shock absorber mounting nut (upper) (a):
35 Nm (3.5 kgf-m, 25.5 lb-ft) Rear shock absorber mounting nut (lower) (b): 60 Nm (6.0 kgf-m, 43.5 lb-ft) I827H1230003-02
Swingarm Removal And Installation Removal 1) Place the vehicle on level ground and support the vehicle with jack! B827H22306005
CAUTION Make sure that the vehicle is supported securely2) Remove the footrest mudguardsRefer to "Exterior Parts Removal
and Installation in Section 9D (Page 9D-3)"3) Remove the rear wheelsRefer to "FrontRear Wheel Removal and Installation in
Section 2D (Page 2D-3)"4) Remove the final gear assemblyRefer to "Final Gear Assembly Removal and Installation in Section