2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 253Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 253

Rear Suspension: Install the final gear assemblyRefer to "Final Gear Assembly Removal and Installation in Section 3B (Page
I827H1230008-01 3) Inspect the bushings for wear or damageIf any damages are found, replace them with new ones Installation
Install the swingarm in the reverse order of removalPay attention to the following points: Apply thread lock to the swingarm
pivot bolts: Thread lock cement 9900032030 (THREAD LOCK CEMENT SUPER 1303 or equivalent) Tighten the swingarm pivot nuts
to the specified torqueTightening torque Swingarm pivot nut (a): 102 Nm (10.2 kgf-m, 74.0 lb-ft) Tighten the rear shock absorber
lower mounting boltsRefer to "Rear Shock Absorber Removal and Installation (Page 2C-2)"I827H1230007-01 4) Install the swingarmRefer