2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 292Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 292

3B-17 Differential: 4) Install the front drive (differential) case cover and tighten the bolts to the special torque diagonallyNOTE
in) 1.30 mm (0.0512 in) 1.35 mm (0.0531 in) 1.40 mm (0.0551 in) 1.45 mm (0.0571 in) 8) After selecting the proper size of
shim(-s), check or adjust the backlash and tooth contact(a) I827H1320057-01 5) Remove the front drive (differential) case
cover6) Measure the thickness of compressed solder (1) with the micrometerSpecial tool (A): 0990020205 (Micrometer (0 25
mm)) Tooth Contact! CAUTION Make sure to check the backlash after the tooth contact has been adjusted, since it may have
changedAdjust the tooth contact and backlash until they are both within specificationIf the correct tooth contact cannot
be maintained when adjusting the backlash, replace the pinion gear and final drive (differential) gear as set1) Remove the