2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 306Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 306

3B-31 Differential: Right Side Shim Selection 1) Put few pieces of solder (1) (O.D 1.2 1.5 mm (0.05 0.06 in) L: mm (0.24
16.5 lb-ft) NOTE Do not install new O-ring to the gear cover Do not apply thread lock to the bolts I831G1320136-01 5) Select
the proper size of shim(-s) from the table, according as the compressed solder thicknessList of shims (for right side) Part
NoShim thickness 27326-18A00-035 0.35 mm (0.0138 in) 27326-18A00-040 0.40 mm (0.0157 in) 27326-18A00-050 0.50 mm (0.0197
in) 27326-18A00-060 0.60 mm (0.0236 in) After selecting the proper size of shim(-s), check or adjust the backlash and tooth
contact Tooth Contact Remove the final driven gear Clean and degrease several teeth on the final drive gear and final driven