2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 329Get this manual

2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 329

Transfer: 6) Remove the spring (11) and gearshift cam stopper (12) 3C-18 Install the washer (2) and gearshift cam stopper
CEMENT SUPER 1322 or equivalent) I827H1330042-02 When installing the return spring, position the stopper "C" of gearshift
shaft No2 and stopper "D" of shift gear between the return spring ends"C" I827H1330043-01 Install new snap ring (4) and washer
(5)I827H1330040-01 Tighten the nut (1) to the specified torqueNOTE Hook the return spring end to the stopperTightening torque
Gearshift cam stopper nut (a): 10 Nm (1.0 kgf-m, 7.0 lb-ft) CAUTION The removed snap ring must be replaced with new one I827H1330044-01