Chrysler 100, 115 and 140 HP Outboard Motors Service Manual, OB 3439, Page 87Get this manual

Chrysler 100, 115 and 140 HP Outboard Motors Service Manual, OB 3439, Page 87

Quality of the image is intentionally reduced!

ADisconnect high tension lead wire from ignition coil by pulling boot away from co ilthen pulling lead wire from coil Figure 13 2 Remove bracket with housing as follows :
ARemove two (2) screws

Back to Chrysler 100, 115 and 140 HP Outboard Motors Service Manual, OB 3439
ATV Jet Ski Outboard Motors Personal Watercraft Snowmobiles Stern Drives DIY Repairs