1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 134Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 134

5 DR4186 Ohmmeter TestStop Button INotel All ohmmeter tests must be performed with the engine NOT running 1Most steering
RUN position To stop the engine when the clip and lanyard assembly is in place, press the stop button until the engine stops2Install
the clip and lanyard Isl 3Calibrate an ohmmeter on appropriate scaleConnect meter leads between ignition plate end of connector,
terminal "E", and clean engine ground The meter must show high reading4Momentarily, press inward on the stop button The meter