1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 135Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 135

6 Ohmmeter TestKey Switch Note All ohmmeter tests must be performed with the engine NOT running1Install emergency stop switch
2, Key ON reading is low one, disconnect harness blackyellow leads from key switch "M" terminal If meter now shows high reading,
test key switchRefer to Electrical Section If meter shows low reading, go to Step 44Separate emergency stop switch lead from
harness blackyellow lead at key switch If meter now shows high reading, test emergency stop switch If meter shows low reading,