1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 156Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 156

rw main bearing.retaining ring bearing and remove the 23 Remove the from groove of the center Separate the loose needle bearings
the piston rings using an appropriate ring expanderDO NOT try to save the ringsInstall complete set of new rings on every
powerhead service jobf16117Using tool as drawn on Page 4-8, or OMCRetaining Ring Pliers, PIN 325937, remove the wrist pin
retaining rings Discard the ringsr:tJl18The fit between the wrist pi to bosses of the piston is loose on both sidesPush the
wrist pin through to free the piston from the connecting rodIf necessary, use OMC Piston Cradle, PIN 326573, and OMC Wrist
Pin Pressing Pin, PIN 392511With the piston skirt flush with the cradle, press out the wrist pin using an arbor pressBe careful