1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 163Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 163

19Thoroughly clean and degrease the crankcase mating flange of the cylinder block with OMC Cleaning Solvent and let air dry20Apply
tight2124When the crankcase taper pinis seated, install and firmly seat the COA6229 25Using softface mallet, lightly tap
bottom of the crankshaftto seat the lower main bearing2226Apply OMC Gasket Sealing Compound to meta case of new upper main
bearing sealInstall seal using OMC Seal Installer PIN 391060 with lip of seal facing in r:;:;l r:;;] 27Apply OMC Gasket Sealing
Compound to metal cases of two new crankcase head sealsPlace the small diameter seal on OMC Crankcase Head Seal Installer,
PIN 330251 or 433391, with lip ofthe seal facing large diameter of the tooInstall the seal until tool contacts the headUse
the opposite side of the tool to install the large diameter seal Lip of this seal must face away from large diameter of the