1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 178Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 178

f19l 6Remove all the screws from the cylinder head water cover, tap it around the edge with soft mallet to break the seal,
pieces and clean the gasket surfaces Check the inner exhaust cover for pitting and flatnessIf pitting exists or the cover
is warped, discard it and replace with new cover during reassembly 221 9Remove the surfaces intake bypass cover and clean
the gasket 1231 screw, and remove the hex head screws and one flat head '0Remove the seven intake manifold1241 plate" Remove