1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 188Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 188

28Apply light coat of outboard lubricant to the corners of the connecting rod and rod capPlace frame on connecting rod using
rodThe groove lines on the jaws must be centered on the rodcrankpin diameterINotel The must be followed to assure frame is
squarely In position1261 29Tighten the forcing screw to torque of 23 inIbs(2,5 Nm)30Loosen both rod cap screws 1f4 turn 1271
31Apply preliminary torque of 40-60 inIbs(5-7 Nm) to both rod cap screws32Apply final torque of 30-32 ftIbs(40-43 Nm) in