1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 190Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 190

r:;:;] 47Place the thermostat and the seal provided in the cylinder headSet the spring thermostat in the cavity on top of
both sides of new bypass cover gasketInstall the gasket and bypass coverTighten the screws to torque of 60-84 inIbs(7-9 Nm)1361
51Slide new leaf plate gasket over the crankcase studs, then install the leaf plateDo not use sealer on the gasketApply OMC
Gel-Seal II to the threads of the flat head screw, then install and tighten the screw1371 52Install new intake manifold gasket
over the crankcase studs, then install the manifold Do not use sealer on the gasketInstall and tighten the screws to torque