1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 209Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 209

Installation 1Insert the stop button wires and throttle cable through the lower motor cover grommetUse isopropyl alcohol
Tool, PIN 322697, to install the stop button black wire into the 5-pin Amphenol plug1al6Connect the Amphenol connectorSecure
the connector to the ignition coil post with tie strap 19l7Thread the throttle cable anchor onto the cable housing until
anchor is flush with end of threads 8Thread the cable end connector on the cable until seated rv Insert pin throttle cable
connector into throttle lever and Positi.on the rv withPosition throttle cablewasher onpowerhead and secure 10anchor shoulder
screw and 1.1Hook cable retainer around throttle cable and install air silencer 12Install manual starter and lower motor