1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 212Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 212

10 1sl 8Using punch and mallet, drive the steel pin that retains the inner handle from the steering handleINotel Do not remove
the steering handle components for wear, cracks, or damageReplace parts if necessary3Refer to Ignition System, Section 3,
to test stop switch Assembly 1Install the throttle cable seal in inner handlef101 2If removed, apply Loctite Depend 300 adhesive
to inner handle at areas shown r,v 3Install the metal outer handle over the plastic inner handle L!!.J and drive the outer
handle into place1sl 4Secure tab of the inner handle into recess of the outer handle with the steel pin throttle cable trunnion