1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 217Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 217

'8l13Remove the lower thrust mount and shift rod grommet 14Refer to Cleaning and Inspection at the beginning of this sectionAssembly
caps with new O-rings and torque screws to 60-84 inIbs(7-9 Nm)r:JOl5Place the lateral mounts in the lower mount bracketsApply
OMC Nut Lock to threads of lower mount bracket screwsInstall the lower mount bracketsTighten screws to torque of 60-84 inIbs(7-9
Nm)f11l6Position new idle relief muffler gasketInstall the muffler to the exhaust housingApply OMC Nut Lockto the muffler's
retaining screw threadsTighten the screws to torque of 48-60 inIbs(5-7 Nm)fJl7Position the lower engine cover support on
the exhaust housing and torque the five screws to 60-84 inIbs(7-9 Nm)f218Lubricate the upper shift rod with OMC Tripe-Guard
greaset=llnstall the shift rod into the shift arm with pin and new cotter pin9Install the powerhead as described in Section