1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 225Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 225

Assembly Lubricate the tilt tube and tiller handle components with OMC Triple-Guard greaserefer to the two reference pictures
flange of the pilot shaftAssemble the pilot shaft to the steering bracket and tighten the screws to torque of 120-144 inIbs(14-16
Nm)1sl3Install the upper front mount tothe steering bracket with nut and washerTighten the nut to torque of 144-168 inIbs(16-19
N.m )'sl4Assemble the friction block and liner as shown in figure 4Lubricate and place the liner and friction block in the