1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 233Get this manual

1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 233

1sl4Lightly coat the exterior of the impeller cup wi,t OMC Gasket Sealing CompoundPosition the impeller cup in the impeller
down over the driveshaft and position it7Apply OMC Needle Bearing Assembly Grease to the impeller drive pin and position
in on the flat of the driveshaft8Apply thin bead of OMC Adhesive to the impeller housing mounting surface9Slide the impeller
housing into position while rotating the driveshaft to engage the impeller with the drive pinf8110Apply OMC Nut Lock to the